Author Topic: Decent rate  (Read 6076 times)

Offline Richard Avana/TWA2032

  • Newbie
  • *
  • Posts: 3
    • View Profile
Decent rate
« on: September 17, 2015, 12:53:33 PM »
Can someone help me with decent rate what is a good decent rate for landing on a runway after receiving clearance for ILS approch.
Thanks Richard TWA 2032

Offline Michael Concannon /OVA5155

  • Hero Member
  • *****
  • Posts: 380
    • View Profile
Re: Decent rate
« Reply #1 on: September 19, 2015, 07:57:45 PM »
depends on ground speed on approach; for a prop like a Connie  or DC-4, approach speed 105 - 115 KIAS no wind, try bracketing about 500 fpm.

typical jet with approach speed around 140 KIAS no wind, try bracketing 800 fpm. In any case, try to be smooth with VSI in tracking the glide slope  - stay trimmed , try to vary VSI no more than plus or minus 200 fpm from target descent rate and you will soon see what a good rate of descent for your approach speed will be. Also try to be smooth with power changes, they can really cause problems with trim and speed changes in some airplanes.
Gear DOWN
Flaps DOWN
Hook DOWN
Spoilers OFF

Offline Richard Avana/TWA2032

  • Newbie
  • *
  • Posts: 3
    • View Profile
Re: Decent rate
« Reply #2 on: October 01, 2015, 07:42:01 AM »
Thank you I will try  that  ;D

Offline Doug Moeller TWVA-VPOPS

  • Administrator
  • Hero Member
  • *****
  • Posts: 458
    • View Profile
Re: Decent rate
« Reply #3 on: November 14, 2015, 10:43:25 AM »
Richard....you can go to My airplane.com type in the airport code you are flying to....it will list all the airport info on Jeppson charts.....landing approach plates...SIDS and STARS....etc...typically once on final your decent rate is from 900-1200fpm....

Doug Moeller

 

incident-prescription