Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Brian Wilber/Ozark CEO

Pages: [1] 2 3 ... 5
1
THE LOUNGE / Yo
« on: December 25, 2023, 02:42:53 PM »
Merry Christmas, y'all!

2
THE LOUNGE / Re: Web Site Problems Apr - May 2023
« on: July 26, 2023, 01:30:10 PM »
I wish I had some good news, but Ryan is aware that there is a problem, and is working on it when he can. It's puzzling as Ozark is running the same software on the same server, and it has no issues.

3
THE LOUNGE / Re: Web Site Problems Apr - May 2023
« on: May 22, 2023, 12:45:40 PM »
There doesn't seem to be an issue using Firefox. Chrome is a problem. Not sure about other browsers. I am going on fishing trip with my brother on Wed. Won't be back until June2. I will try to get Ryan to look at it in the meantime, but I can't guarantee anything. Sorry.

4
THE LOUNGE / Re: Never ever did I ever dream
« on: May 28, 2022, 11:16:00 PM »
The one with the wooden planks is still there, but I don't know about the other. I know the 5-star hotel on the opposite end of the beach from that bar lost 300 of its 600 rooms in Hurricane Irma. There were no 747s that day (dang it) so there was minimal fence riding. I'm too old for that anyway.

5
THE LOUNGE / Never ever did I ever dream
« on: May 27, 2022, 10:52:44 AM »
I'd seen many videos of planes landing at Princess Julianna Airport in Philipsburg, St. Maarten (you know, the ones that land over Maho Beach?), but I never dreamed I'd see it in person. A couple of weeks ago, the dream I never dreamed came true.

Check it out:
https://www.youtube.com/channel/UCMhBcNWMXkatzoHivIzMw3Q

6
kACARS_Free / Re: Can't install due to newer version
« on: February 27, 2022, 05:07:22 PM »
A big thanks to my good friend Marty. Glad to see you up and running with it.

7
THE LOUNGE / Re: TWA site certificate expired 21 April
« on: May 06, 2021, 03:25:54 PM »
You should be all set to use the https URL now. Had to manually request a new certificate. Not sure why, but it works for me now. Btw, the treatment went well. Only two more to go and then I get a break.

8
GALLERY / Re: TWA BOEING 737 MAX 8 P3D
« on: December 10, 2020, 02:54:52 PM »
Purdy!

9
THE LOUNGE / Happy Thanksgiving
« on: November 26, 2020, 05:17:20 PM »
I hope all my American OVA/TWVA friends had a great turkey day.

10
MUMBLE (Our voice client) / Re: Tutorial
« on: October 17, 2020, 12:15:41 PM »
Yes, that is the address to put into Mumble.

11
MUMBLE (Our voice client) / Re: Tutorial
« on: October 01, 2020, 03:12:19 PM »
I noticed the other night that our Mumble server is still working. However, there are a couple changes to be aware of. First, the download address is now simply https://mumble.com, and the latest version is 1.3.2. It is pretty obvious there on the front page, so you'll have no problem finding it.

To set it up after you install it and get connected as directed above in the OP, make sure your mic and if using a headset, are hooked up. Go into your computer's sound settings, find your microphone, and ensure the boost checkbox is checked or the slider is turned up. Next, go back into Mumble and click on "Configure">"Settings" and click on "Audio Input" on the left if it's not highlighted already. Click the dropdown arrow beside of "Default Device" in the Interface box, and select your microphone device.

Now you need to set up a push to talk key. Mumble will do Voice Activation, but if you don't get it just right, it doesn't work well, and it's annoying. Please set up PTT. In the Transmission box, click the dropdown and select "Push to Talk." To set up a key, click on "Shortcuts" to the left. Click "Add" and then click on "Unassigned." Next, click the dropdown beside of "Unassigned", and select "Push to Talk." Now click to the right of "Push to Talk" right under "Shortcut." Find a key that you don't use much in your sim (so that you don't transmit while using that key in your sim.) Now just press that key, and Mumble will assign that key automatically.

Finally, click on "Audio Output" and in the same way that you chose your device for your microphone, choose your output device (usually headphones).

That's it. You can play with the volume on the Output page, but the other settings should work for you the way they are. There is a built text capability, so if things go wonky, I should be able to help you that way. Consider this your official invite to join us and chat.


12
GALLERY / Re: Ozark DC3 in XPlane 11
« on: September 28, 2020, 02:40:16 PM »
Hi, Vskylabs's dc3 has an own OZARK livery.

I need to get that, thanks.

13
GALLERY / Re: Ozark DC3 in XPlane 11
« on: September 27, 2020, 08:36:01 AM »
Sweet!! Is that your own paint, or did you find it somewhere?

14
THE LOUNGE / Re: Is anyone else gonna take the plunge?
« on: August 24, 2020, 03:31:29 PM »
Thanks Marty.

Overall, is it worth the upgrade? Is FSUIPC necessary, Also, is the live weather any good, or have you had a chance to check that out?

I am upgrading to about the recommended hardware with the vid card being the exception. That will be an Nvidia GeForce GTX 1070 w/8gigs VRAM. Memory will be 16g Crucial Ballistix 3600 with CAS Latency at 16 clocks. I don't expect to be able to run the settings maxed out, but I hope to get a decent experience out of it.


15
THE LOUNGE / Is anyone else gonna take the plunge?
« on: August 22, 2020, 08:10:27 PM »
The chances are pretty good that I am going to be stuck at home for the foreseeable future, so I have ordered the parts and pieces to enable my machine to run MSFS 2020. I will likely buy Xplane 11 as well. See y'all in the skies.

Pages: [1] 2 3 ... 5
incident-prescription